您好,欢迎来到61ic! | [登录] [注册] 忘记密码 | 设为首页 帮助
 . 网站首页 . 业界新闻 . 设计中心 . 移动技术 . TI专栏 . ADI专栏 . FPGA专栏 . 代码工厂 . 官方商城 . 
 . 活动专区 . 新品快递 . 解决方案 . 前沿科技 . TI资源 . ADI资源 . FPGA资源 . 下载中心 . 产品展示 . 
加入收藏
付款方式
联系我们
您现在的位置: 61IC电子在线 >> TI专栏 >> TI DaVinci >> OMAP3x >> 正文
  ICETEK-OMAP_L138串口启动烧写内核的问题总结           ★★★ 【字体:
ICETEK-OMAP_L138串口启动烧写内核的问题总结
作者:casey_ch…    文章来源:casey_chen    点击数:    更新时间:2014-4-29    

条件:

开发板:ICETEK-OMAPL138核心板

启动方式:UART(0:1:0:1)

 

 Window命令行模式:

*******************************************************************************

Microsoft Windows XP [版本 5.1.2600]

(C) 版权所有 1985-2001Microsoft Corp.

D:\OMAP-L138_FlashAndBootUtils_2_40\OMAP-L138\GNU>sfh_OMAP-L138.exe

-----------------------------------------------------

   TISerial Flasher Host Program for OMAP-L138

  (C) 2012, Texas Instruments, Inc.

  Ver. 1.67

-----------------------------------------------------

 

 

Usage:

 

sfh_OMAP-L138 <Command> [-targetType<Target>] [-flashType <FlashType>] [<Options>][<InputFiles]

       <Command> is required and can be one of the following:

                -erase          Global erase of the flash memorydevice (no input files)

                -flash_noubl    Place single bootable image in the flashmemory device (single input file)

                -flash          Place a secondary user boot loader(UBL) and application image in the

                                flash memorydevice (first input file is UBL binary, second input

                                file is thebinary application image)

                -flash_dsp      Place a DSP secondary user boot loader(UBL), an ARM secondary user boot loader

                                and theapplication image in the flash memory device (first input file is DSP

                                UBL binary, thesecond file is ARM UBL binary, and the third input file is

                                the binaryapplication image). This is only used for OMAP-L137 devices.

 

       -targetType <Target>   Specify the exact target type within the OMAP-L138 family.

                <Target>                One of OMAPL138, OMAPL138_LCDK, AM1808,AM1810, C6748, C6746, C6748_LCDK (default is OMAPL138)

 

       -flashType <Flash>     Specify exact flash type among supported types for the platform.

                <Flash>                 One of SPI_MEM, NAND, NOR(default is SPI_MEM)

 

       <Options> can be the following:

                -h                      Display this help screen.

                -v                      Display more verboseoutput returned from the target device

                -p <PortName>           Use <PortName> as the serialport (e.g. COM2, /dev/ttyS1).

                -baud <BaudRate>        Uses <BaudRate> as the serialport baud rate (defaults to 115200)

                -appStartAddr           <Application entry point address>  Specify in hex (defaults to 0xC1080000)

                -appLoadAddr            <Application image loadaddress>  Specify in hex (defaults to0xC1080000)

                -appFlashBlock          <Block to flash applicationimage> Specify in decimal (default depends on device)

 

D:\OMAP-L138_FlashAndBootUtils_2_40\OMAP-L138\GNU>sfh_OMAP-L138.exe -targetType OMAPL138_LCDK-erase -p COM3 –v(默认SPI_MEM启动)

 

问题1:

进度条无反应

卡在Target:Doing block erase

解决方法:无

 

问题2:如果TargetType 为 OMAPL138

则会卡在Waiting for SFT on the OMAP-L138

如下图所示:

 解决方法:TargetType 为 OMAPL138_LCDK

 

修改后产生问题3:NAND Memory Initialization Fail

如图所示:

文章录入:admin    责任编辑:admin 
  • 上一篇文章:

  • 下一篇文章: 没有了
  • 发表评论】【加入收藏】【告诉好友】【打印此文】【关闭窗口
    最新热点 最新推荐 相关文章
    OMAP下移植USB wifi小结
    OMAP-L138 FlashAndBootUti…
    CCS下的C和汇编的混合编程
    OMAPL138问题
    简单的在OMAP3530上运行Open…
    Linux下USB从(USB gadget) 驱…
    使用DirecetFB支持Qt4.7.0
    交叉编译alsa音频库并移植到…
    在angstrom中修改开机画面(…
    通过OMAP3530的spi操作ads78…
      网友评论:(只显示最新10条。评论内容只代表网友观点,与本站立场无关!)
    站长:61 湘ICP备13001086号-2