您好,欢迎来到61ic! | [登录] [注册] 忘记密码 | 设为首页 帮助
 . 网站首页 . 业界新闻 . 设计中心 . 移动技术 . TI专栏 . ADI专栏 . FPGA专栏 . 代码工厂 . 官方商城 . 
 . 活动专区 . 新品快递 . 解决方案 . 前沿科技 . TI资源 . ADI资源 . FPGA资源 . 下载中心 . 产品展示 . 
加入收藏
付款方式
联系我们
您现在的位置: 61IC电子在线 >> TI专栏 >> TI模拟设计 >> 电源管理 >> 正文
  [组图]TI TPS23754 Class 4 PoE电源转换器参考设计           ★★★ 【字体:
TI TPS23754 Class 4 PoE电源转换器参考设计
作者:TI    文章来源:TI    点击数:    更新时间:2015-1-4    
TI公司的TPS23754和TPS23756组合了以太网供电(PoE)用电设备(PD)接口和电流模式DC/DC控制器,PoE接口支持IEEE 802.3at标准,支持高效率的拓朴,功率高达30W,主要用在IEEE 802.3at标准兼容的设备,视频和VoIP电话,RFID读卡器,多波段接如点和安全照相机.本文介绍了TPS23754/6主要特性,框图,典型应用电路,以及Class 4 PoE电源转换器参考设计主要特性,电路图,材料清单和PCB设计图.

The TPS23754 and TPS23756 devices have a combined power-over-ethernet (PoE) powered-device (PD) interface and current-mode DC/DC controller optimized specifically for isolated converters. The PoE interface supports the IEEE 802.3at standard.

The TPS23754 and TPS23756 support a number of input voltage ORing options including highest voltage, external adapter preference, and PoE preference. These features allow the designer to determine which power source will carry the load under all conditions.

The PoE interface features the new extended hardware classification necessary for compatibility with high-power midspan power sourcing equipment (PSE) per IEEE 802.3at. The detection signature pin can also be used to force power from the PoE source off. Classification can be programmed to any of the defined types with a single resistor.

The DC/DC controller features two complementary gate drivers with programmable dead time. This simplifies the design of active-clamp forward converters or optimized gate drive for highly-efficient flyback topologies. The second gate driver may be disabled if desired for single MOSFET topologies. The controller also features internal softstart, bootstrap startup source, current-mode compensation, and a 78% maximum duty cycle. A programmable and synchronizable oscillator allows design optimization for efficiency and eases use of the controller to upgrade existing power supply designs. Accurate programmable blanking, with a default period, simplifies the usual current-sense filter design trade-offs.

The TPS23754 device has a 15-V converter startup while the TPS23756 device has a 9-V converter startup. The TPS23754-1 replaces the PPD pin with a no-connect for increased pin spacing.

TPS23754/6主要特性:

Powers up to 30-W (Input) PDs
DC/DC Control Optimized for Isolated Converters
Supports High-Efficiency Topologies
Complete PoE Interface
Enhanced Classification per IEEE 802.3at With Status Flag
Adapter ORing Support
Programmable Frequency With Synchronization
Robust 100-V, 0.5-Ω Hotswap MOSFET
–40°C to 125°C Junction Temperature Range
Industry Standard PowerPAD TSSOP-20

TPS23754/6应用:

• IEEE 802.3at Compliant Devices
• Video and VoIP Telephones
• RFID Readers
• Multiband Access Points
• Security Cameras

图1. TPS23754/6框图

图2.采用TPS23754的高效转换器电路图

图3.驱动同步的反激电路图

Class 4 PoE电源转换器参考设计

This converter reference design is used for Class 4 PoE applications where high efficiency is required. The active clamp forward converter with synchronous rectifiers provides excellent efficiency and small size for PoE applications such as a wireless access point. The TPS23754 contains both the PoE Powered Device and the PWM controller functions.

Class 4 PoE电源转换器参考设计主要特性:

High efficiency(90%)
3.3V at 7.6A output
Isolated Forward with synchornous rectifier
Uses TPS23754 high-power, high-efficiency PoE interface PD and PWM controller
Small size solution
This circuit design is full-functional tested and recommended for new designs
Evaluation Board: Class 4- 3.3V/7.6A High Efficiency Active Clamp Forward Converter for PoE Applications
图4. Class 4  3.3V/7.6A PoE电源转换器参考设计外形图

图5. Class 4 PoE电源转换器参考设计电路图(1)

图6. Class 4 PoE电源转换器参考设计电路图(2)
Class 4 PoE电源转换器参考设计材料清单:


Class 4 PoE电源转换器PCB设计图见:

详情请见:
http://www.ti.com/lit/ds/symlink/tps23754.pdf
http://www.ti.com/lit/df/slvrb25/slvrb25.pdf
以及http://www.ti.com/lit/df/slvrb24/slvrb24.pdf
文章录入:admin    责任编辑:admin 
  • 上一篇文章:

  • 下一篇文章: 没有了
  • 发表评论】【加入收藏】【告诉好友】【打印此文】【关闭窗口
    最新热点 最新推荐 相关文章
    TI UCC28710输出28V 350W电源…
    TI宣布其基于KeyStone的AM5K…
    TI TPS23754 Class 4 PoE电源…
    TI bq5102x WPC 5W无线电源接…
    TPA6132A2正相单端放大器电路…
    TI PCM186x 110dB立体声音频…
    DM8168HDVPSS中的显示输出
    TI推出可编程微控制器解决方…
    TI 66AK2Hx系统级芯片(SoC)开…
    TI UCC28630高度集成大功率反…
      网友评论:(只显示最新10条。评论内容只代表网友观点,与本站立场无关!)
    站长:61 湘ICP备13001086号-2