您好,欢迎来到61ic! | [登录] [注册] 忘记密码 | 设为首页 帮助
 . 网站首页 . 业界新闻 . 设计中心 . 移动技术 . TI专栏 . ADI专栏 . FPGA专栏 . 代码工厂 . 官方商城 . 
 . 活动专区 . 新品快递 . 解决方案 . 前沿科技 . TI资源 . ADI资源 . FPGA资源 . 下载中心 . 产品展示 . 
加入收藏
付款方式
联系我们
您现在的位置: 61IC电子在线 >> 模拟设计 >> 数据转换 >> 正文
  [组图]ADI ADP5053 Xilinx FPGA电源解决方案           ★★★ 【字体:
ADI ADP5053 Xilinx FPGA电源解决方案
作者:ADI    文章来源:ADI    点击数:    更新时间:2014-2-11    
ADI公司的ADP5053是四路高性能DC/DC降压转换器,并集成了监测电路,看门狗定时器和手动重置,输入电压4.5V-15.0V,全温度范围内的输出精度±1.5%,可调开关频率250kHz-1.4MHz,固定/可调输出,主要用在小型基站,FPGA和处理器电源,安全和监视,医疗电子.本文介绍了ADP5053主要特性,框图, 典型应用电路图以及多种Xilinx FPGA电源解决方案详细电路图和材料清单.

The ADP5053 combines four high performance buck regulators, a supervisory circuit, a watchdog timer, and a manual reset in a 48-lead LFCSP package that meets demanding performance and board space requirements. The device enables direct connection to high input voltages up to 15.0 V with no preregulators. 

Channel 1 and Channel 2 integrate high-side power MOSFET and low-side MOSFET drivers. External NFETs can be used in low-side power devices to achieve an efficiency optimized solution and deliver a programmable output current of 1.2 A, 2.5 A, or 4 A. Combining Channel 1 and Channel 2 in a parallel configuration can provide a single output with up to 8 A of current. 

Channel 3 and Channel 4 integrate both high-side and low-side MOSFETs to deliver an output current of 1.2 A. 

The switching frequency of the ADP5053 can be programmed or synchronized to an external clock. The ADP5053 contains a precision enable pin on each channel for easy power-up sequencing or adjustable UVLO threshold. 

The ADP5053 contains supervisory circuits that monitor the voltage level. The watchdog timer can generate a reset if the WDI pin is not toggled within a preset timeout period. Processor reset mode or system power on/off switch mode can be selected for manual reset functionality.

ADP5053主要特性: 

Wide input voltage range: 4.5 V to 15.0 V 
±1.5% output accuracy over full temperature range 
250 kHz to 1.4 MHz adjustable switching frequency 
Adjustable/fixed output options via factory fuse 
Power regulation 
Channel 1 and Channel 2: programmable 1.2 A/2.5 A/4 A sync buck regulators with low-side FET driver 
Channel 3 and Channel 4: 1.2 A sync buck regulators 
Single 8 A output (Channel 1 and Channel 2 operated in parallel) 
Precision enable with 0.8 V accurate threshold 
Active output discharge switch 
FPWM or automatic PWM/PSM selection 
Frequency synchronization input or output 
Optional latch-off protection on OVP/OCP failure 
Power-good flag on selected channels 
UVLO, OCP, and TSD protection 
Open-drain processor reset with external adjustable threshold monitoring 
Watchdog refresh input 
Manual reset input 

ADP5053应用: 

Small cell base stations 
FPGA and processor applications 
Security and surveillance 
Medical applications


图1. ADP5053框图

图2. ADP5053典型应用电路图:开关频率600kHz,固定输出模式


图3. ADP5053典型应用电路图:开关频率600kHz,可调输出模式


图4. ADP5053典型应用电路图:开关频率600kHz,可调输出模式,通路1/通路2并联输出

图5. ADP5053评估板外形图

Xilinx FPGA电源解决方案
Integrated Power Solutions for Xilinx FPGAs
Modern high performance FPGA-based systems require an increasing number of dedicated rails supplying core, I/O, memory, PLL, and precision analog voltages. Typical FPGA-based systems today make use of standalone switching regulators and LDOs; but, as board area continues to shrink as end product form factors shrink, this complicates the task of designing more efficient power management solutions for powering FPGAs. Combining multiple switching regulators and LDOs into a single package enables very small, flexible, highly efficient power management solutions for powering FPGAs and precision analog components with the highest system reliability.


图6. ADP5053 Xilinx FPGA电源框图

图7. ADP505x Xilinx FPGA电源解决方案外形图


图8. ADP5050 Xilinx FPGA Spartan-6电源解决方案电路框图
ADP5050 Xilinx FPGA Spartan-6电源解决方案材料清单:


图9. ADP5050 Xilinx FPGA Artix-7/Kintex-7电源解决方案电路框图
ADP5050 Xilinx FPGA Artix-7/Kintex-7电源解决方案材料清单:


图10. ADP5050 Xilinx FPGA Virtex-7电源解决方案电路框图
ADP5050 Xilinx FPGA Virtex-7电源解决方案材料清单:


图11. ADP5050 Xilinx FPGA Zynq电源解决方案电路框图
ADP5050 Xilinx FPGA Zynq电源解决方案材料清单:

详情请见:
http://www.analog.com/static/imported-files/data_sheets/ADP5053.pdf
http://www.analog.com/static/imported-files/pwr_mgmt/fs_pod_collateral/Integrated-Power-Solutions-for-Xilinx-Spartan-FPGAs_2013.pdf

ADP5053.pdf
Integrated-Power-Solutions-for-Xilinx-Spartan-FPGAs_2013.pdf
文章录入:admin    责任编辑:admin 
  • 上一篇文章:

  • 下一篇文章: 没有了
  • 发表评论】【加入收藏】【告诉好友】【打印此文】【关闭窗口
    最新热点 最新推荐 相关文章
    ADI ADSP-CM40x混合信号控制…
    离输入模块的解决方案
    ADI公司的ADSP21160为主处理…
    ADI锂电池测试设备方案
    ADI CCES将不支持VDK,而是使…
    基于ADI Blackfin系列定点DS…
    ADI:数据转换器重点关注工业…
    ADI ADP1614 650 kHz/1.3 MH…
    ADI ADV7630 HDMI4:1多路转…
    ADI ADP2384/ADP2386降压DC-…
      网友评论:(只显示最新10条。评论内容只代表网友观点,与本站立场无关!)
    站长:61 湘ICP备13001086号-2