您好,欢迎来到61ic! | [登录] [注册] 忘记密码 | 设为首页 帮助
 . 网站首页 . 业界新闻 . 设计中心 . 移动技术 . TI专栏 . ADI专栏 . FPGA专栏 . 代码工厂 . 官方商城 . 
 . 活动专区 . 新品快递 . 解决方案 . 前沿科技 . TI资源 . ADI资源 . FPGA资源 . 下载中心 . 产品展示 . 
加入收藏
付款方式
联系我们
您现在的位置: 电子在线 >> 电源管理 >> 正文
  [组图]ADI ADP5065兼容USB功率电能快速电池充电管理方案           ★★★ 【字体:
ADI ADP5065兼容USB功率电能快速电池充电管理方案
作者:ADI    文章来源:ADI    点击数:    更新时间:2013-2-1    
ADI公司的ADP5065是一款内嵌互联直流电压充电输出端与电池端的FET器件,通过FET可以实现电池隔离,当系统驱动电能来自于废电池或没有电池时,系统会立即切换到USB供电模式。ADP5065的输入电压范围为4V至5.5V,最大输入电压高达20V。ADP5065充电器兼容USB2.0、USB3.0和USB电池充电规范1.1。本文通过总结ADP5065器件的特点,分别介绍器件、特性、应用方向及内部结构框图,并给参考设计实例原理图、制板图及元器件清单。

The ADP5065 charger is fully compliant with the USB 2.0, USB 3.0, and USB Battery Charging Specification 1.1 and enables charging via the mini USB VBUS pin from a wall charger, car charger, or USB host port.

The ADP5065 operates from a 4 V to 5.5 V input voltage range but is tolerant of voltages of up to 20 V. This alleviates the concerns about the USB bus spiking during disconnect or connect scenarios.

The ADP5065 also features an internal FET between the dc-to-dc charger output and the battery. This permits battery isolation and, hence, system powering under a dead battery or no battery scenario, which allows for immediate system function on connection to a USB power supply.
Based on the type of USB source, which is detected by an external USB detection chip, the ADP5065 can be set to apply the correct current limit for optimal charging and USB compliance.
The ADP5065 comes in a very small and low profile 20-lead WLCSP (0.5 mm pitch spacing) package.

ADP5065主要特性:

3 MHz switch mode charger

1.25 A charge current from dedicated charger

Up to 680 mA charging current from 500 mA USB host

Operating input voltage from 4.0 V up to 5.5 V

Tolerant input voltage −0.5 V to +20 V (USB VBUS)

Dead battery isolation FET between battery and charger output

Battery thermistor input with automatic charger shutdown for when battery temperature exceeds limits

Compliant with the JEITA Li-Ion battery charging temperature specification

SYS_EN_OK flag to hold off system turn-on until battery is at minimum required level for guaranteed

system startup due to minimum battery voltage and/or minimum battery charge level requirements

EOC programming with C/20, C/10 and specific current level selection

ADP5065应用:

Digital still cameras

Digital video cameras

Single cell Li-Ion portable equipment

PDA, audio, GPS devices

Mobile phones


图1. ADP5065方框图

ADP5065设计原理图:

图2. ADP5065设计原理图

ADP5065设计方案材料清单:


PCB元件布局图:












ADP5065.pdf

UG-415.rar
文章录入:admin    责任编辑:admin 
  • 上一篇文章:

  • 下一篇文章:
  • 发表评论】【加入收藏】【告诉好友】【打印此文】【关闭窗口
    最新热点 最新推荐 相关文章
    ADI ADV7630 HDMI4:1多路转…
    ADI ADP2384/ADP2386降压DC-…
    ADSP2181实时语音处理DSP的方…
    ADI ADP1607 2MHz同步升压DC…
    ADI ADP2442 1A同步降压稳压…
    ADI ADP1614 650 kHz/1.3 MH…
    ADI推出集成复杂波形生成功能…
    ADI心率监护仪模拟前端,助中…
    ADI 公司的USB端口隔离方案
    ADI转换器基础知识培训及工业…
      网友评论:(只显示最新10条。评论内容只代表网友观点,与本站立场无关!)
    站长:61 湘ICP备13001086号-2